Dexter 81103 reverse lock out solenoid for brake actuators. Unlike drum brakes, disc brakes generate full braking power in reverse. If your actuator does not have a reverse lockout lever or switch, a reverse lockout solenoid should be installed at the actuator before installing disc brakes. This 12 volt solenoid valve connects to tow vehicles’ back up light circuit for automatic brake lockout. The unit can be wired independently or adapted to trailer wire harness with a 5-flat plug.
Features
- Reverse lockout solenoid should be installed at the actuator before installation of disc brakes
- Connects to the tow vehicle’s back up light circuit for automatic brake lockout
- Unit can be wired independently or adapted to trailer wire harness with a 5-flat plug
Specifications
- Thread Size: 3/16″ IF x 1/8″ MP
- 12 Volt
(Formerly a Tie Down product)
Warning: Handling marine and automotive parts can expose you to chemicals that can cause cancer and reproductive harm. To minimize exposure, work in a well-ventilated area, wear gloves, and wash your hands. For more information see: www.P65Warnings.ca.gov/marine-vessel-parts
